Debris Removal Because of Rooftops not to mention High Rise Buildings : Some Cost-Effective Way to Dumpsters.

Removing debris from tall structures and high-rise buildings safely, efficiently and cost-effectively is rather challenging. While metal dumpsters may be suited to losing walk out debris on construction sites, they’re way overweight, cumbersome and bulky to be hoisted on rooftops or to clear debris located several stories above ground.

Using chutes to slide debris down into a dumpster isn’t the perfect solution either for all reasons. First, maintaining chutes in good working order is labor intensive and requires frequent repairs due to the friction, tearing, and damage that sharp objects and abrasive materials commonly present in industrial debris may cause to the chute fabric because they slide down. In addition, dumping debris down a chute from an elevation generates lots of airborne particles, dust and pollution that can present an important health hazard to workers and the general public.

Fortunately, there are new special debris removal dumpster bags available on the market which can be perfectly suited to this job and are well suited for the roofing and construction industry. These lightweight dumpster bags weigh under 10 lbs and measure roughly 36″ in width, length and height respectively odvoz odpadu. They’re frame-less, self-standing and unlike other flexible dumpsters and traditional metal containers available on the market, they’re so light and compact, that they can easily be deployed by anyone in less than five full minutes on any rooftop, even on the tallest high rise buildings.

Despite their compact size, these reusable FIBCs (Flexible Intermediate Bulk Containers) can haul amazing quantities of debris from roof tops over and once again without falling apart. With a loading capacity of 2,200 lbs and a volume capacity of 27 cubic feet, they could hold virtually almost any abrasive or sharp material generated on a construction site, including jumbo sized debris such as for example broken glass, torn metal, splintered wood, sheet-rock, cement chunks and much more. As they are created from woven polypropylene, these dumpster bags are rip resistant and will not burst open even if the bags are punctured while being lowered to the bottom by crane or while suspended in mid air. The straps that support these specialized FIBC bags are even tougher. They are made to withstand 6,000 lbs of pressure and are manufactured from the same form of nylon material used by car manufacturers for seat belts.

In addition, these special FIBC bags are designed with a secure and user friendly dump bottom mechanism. This gives them an important edge when it comes to discharge rate. Once a case is filled up with debris and lowered to walk out, its contents could be quickly emptied into a traditional dumpster or perhaps a truck by simply releasing a few straps. This forces the bottom of the bag to spread spacious and the contents to spill out whilst the crane lifts the bag back around the rooftop for another load.

These bags are fully customizable. Upon request producer can modify them to match a customer’s specific needs. Including altering how big bags along with how many straps for added support. Obviously, the bags are not just helpful for removing debris from rooftops. They’re also perfectly suited to removing debris at walk out, on steep inclines or even below ground.

Producer of those specialized debris removal bags is currently supplying a free sample bag with the purchase of three or maybe more bags, so if you’re starting a brand new construction, remodeling or renovation project and you will need a cost-effective alternative to traditional metal dumpsters take full advantage of these free sample and compare how fast and efficiently you are able to clear debris from a site with one of these new and improved flexible dumpster bags.

Leave a Reply

Comment
Name*
Mail*
Website*