As may be the case with automobile and home lighting systems, LED lighting systems for saltwater aquariums are becoming very popular among aquarists during the last few years. These systems involve some great points for them, particularly if you buy quality light strip. But additionally there are some issues to keep yourself updated of when utilizing LED lighting in your aquarium.
The Great things about LED Lighting for Aquariums
LED lighting systems are less expensive in two ways. First, an LED bulb provides seven to eight times more wattage per bulb than other types of aquarium lighting, such as for instance halide and T5HO bulbs. What this means is that you get exactly the same level of light from the 30 watt LED bulb as you might find from the 250 watt halide bulb. This will create a significant savings on your monthly electric bill. Second, LEDs can last as much as 50,000 hours. Although you pay more initially for the LED bulb, you might not have to replace it for seven years, as compared with the yearly cost of replacement of a T5HO or halide bulb. The LED aquarium lighting system packs every one of these savings in to a small space, because LED systems are smaller sized than other aquarium lighting.
The caliber of the LED lighting can be a great reason to invest in this system. LED aquarium lighting can deliver as much as 10,000K of lighting, which will be enough to stimulate growth in corals and aquarium plants. Also, you’ve a wide selection of choices in colors by having an LED system. When that is along with computer programming, it can cause an aquarium that either shimmers like it is located in the ocean, or the lighting accentuates the colors of the fish and corals for a fantastic show.
What things to Try to find within an LED Aquarium Light
One aspect of a good LED aquarium lighting system to consider is whether it has a way to cool itself off to be able to extend living of the LED bulbs. This cooling can either be passive or active. The Maxspect Razor R420R uses an aerodynamic design to naturally draw cooler air from beneath the system and through the slim body of the fixture to passively cool the lights. In the case of the Ecotech Marine XR30w Pro Gen3 model, a supporter is built into the middle of the light strip to provide necessary cooling for the LEDs.
Another item to consider when selecting an LED light fixture may be the spectrum range of the lights. You need your system to provide the entire light spectrum your plants, animals, and corals need to be able to thrive like these were in their natural habitat. In the case of the AquaIllumination AI Hydra FiftyTwo LED System, your aquarium organisms can receive a complete spectrum of light that’s LED Linear Light greater than visible light. Should you feel that could be somewhat much for your setup, AquaIllumination also makes an AI Hydra TwentySix LED system, which has half the bulbs of the FiftyTwo model, but nevertheless uses 80 degree lenses to spread the light to best advantage, as well as providing 90 percent LED optical efficiency.
Things to Avoid When Using LED Aquarium Lights
There are a few things you need to keep yourself updated of before establishing your personal LED lighting in your aquarium. Heat is one item. Although LED lights do not release nearly just as much heat into an aquarium system as metal halides or T5HO bulbs do, they are vunerable to reduced lifespan in the current presence of heat. Therefore, LEDs should not be utilized alongside halides, fluorescent, or T5HO bulbs, because of the experience of heat.
Do not get your LED system wet. Although aquarium LED systems are waterproof, they can’t take being dropped into the aquarium. The effect will soon be corrosion and shorting of the circuit board. In addition you need to manage the mineral deposits that will develop on LED light systems for exactly the same reason. Marine aquarium salts can corrode your light system, unless the salts are cleaned off regularly.
Finally, you need to introduce LED lights slowly to coral reef aquariums. These lights can be intensely bright. If bright LEDs are introduced too quickly, corals will often react to the change by expelling their zooxanthellae, leaving behind a bleached coral with no sign of life.